Removal steps of the memory module
When installing:
Insert the notched end of the memory module into the memory slot. Press the memory module in firmly, and
pivot it downward until it snaps into place. Ensure that the memory module is firmly installed in the slot and
does not move easily.
Note: If you install only one memory module, ensure your install it in the memory slot next to the thermal fan
assembly.
1060 I/O bracket
For access, remove these FRUs in order:
• "1020 Base cover assembly" on page 70
Removal steps of the I/O bracket (for L490)
Step
Screw (quantity)
1
M2.5 × 4.5 mm, flat-head, nylon-coated (3)
74
L490 and L590 Hardware Maintenance Manual
Color
Torque
Silver
0.294 Nm
(3.0 kgf-cm)