Miele F 12011 S-1 Operating And Installation Instructions page 41

Display warnings
Message
The  symbol lights up
in the display. You can-
not switch the appli-
ance off.
The alarm symbol 
and the temperature
display are flashing.
The  symbol and the
temperature display are
flashing.
The  symbol lights up
in the display, the appli-
ance does not get cold,
although the appliance
controls are working.
Cause and remedy
The safety lock has been activated.
 Completely deactivate the safety lock (see "Select-
ing further settings – Activating and deactivating
the safety lock").
The temperature in the appliance is too warm or too
cold.
Possible reasons for this include:
– The appliance door has been opened too fre-
quently.
– A large quantity of fresh food has been placed in
the freezer without switching on the SuperFreeze
function.
– A prolonged power cut (mains outage) has oc-
curred.
 Rectify the cause of the alarm. The alarm sym-
bol  will go out.
Depending on the temperature displayed, you
should check whether food in the freezer has star-
ted to thaw or has defrosted. If it has, it should be
used as soon as possible. Defrosted food may
only be re-frozen after it has been cooked.
This indicates an appliance fault:
 Call Service.
Demo mode is switched on. This allows the appliance
to be presented in the showroom without the cooling
system being switched on. Do not activate this setting
for domestic use.
 Contact the Miele Service Department for informa-
tion on deactivating Demo mode.
Problem solving guide
41