Switching On And Off; Before Using For The First Time; Switching Off - Miele F 12011 S-1 Operating And Installation Instructions

Before using for the first time

Packaging material
 Remove all packaging material from
the inside of the appliance.
Protective foil
The appliance is covered with a special
foil to protect it during transportation.
 Do not remove the foil until the appli-
ance has been positioned in its final
location.
Cleaning
Please refer to the relevant instruc-
tions in "Cleaning and care".
 Clean the inside of the appliance and
the accessories.

Switching on and off

Switching the refrigeration ap-
pliance on
To enable the temperature to get suffi-
ciently cold inside the refrigeration ap-
pliance, allow the appliance to run for
approx. 2 hours before placing food in
it.
Do not place food in the freezer zone
until it has reached the required cold-
ness (at least -18 °C).
The compressor can take up to
8 minutes to switch on due to a built-
in switch delay. This delay is designed
to increase the service life of the com-
pressor.
 Press the On/Off button.
The refrigeration appliance will start
cooling. The temperature display and
the alarm symbol will flash until the
freezer zone is cold enough to use.

Switching off

 Press the On/Off button until the dis-
play goes out.
The cooling system switches off. If this
does not happen, the lock is on (see
"Selecting further settings - To deactiv-
ate the lock).
17