Technical Instructions
Document Number 155-314P25
August 1, 2007
Manual Override
Start-up
Troubleshooting
Service Kits
Page 6
MT Series SSC Electronic Valve Actuator, 24 Vac Floating (3-Position) Control
For manual positioning, the override knob
is in the center of the position indicator.
See Figure 7.
Check the wiring and the position indicator
(Figure 8).
Position Indicator
0
1
Check the wiring for proper connections.
If the actuator is inoperative, replace the unit.
Output Shaft
Retracted
Extended
COUNTER
CLOCKWISE
A
RETRACTS
SHAFT
B
A
B
Figure 7. Manual Override.
0
Figure 8. Position Indicator
(Shown in 0 Position).
Siemens Building Technologies, Inc.
CLOCKWISE
EXTENDS
SHAFT