Rear Panel Parts Description - Sony TA-N1 Operating Instructions Manual

Rear Panel Parts Description

1 SPEAKERS A jacks
For details, see page 7.
2 SPEAKERS B jacks
Use with SPEAKERS A terminals when bi-wired
speaker connections are made (page 8).
3 AC IN terminal
Use to connect the supplied power cord to the AC IN
terminal to supply power to this unit from a wall
outlet.
4 BALANCED input jacks
Use to connect the BALANCED output jacks on a
preamplifier to this unit (page 6). Select BALANCED
with the INPUT SELECTOR knob (5).
5 INPUT SELECTOR control
Turn to select the input.
12 GB
1
SPEAKERS
+ R – –
–A–
–B–
+ R – –
IMPEDANCE USE 4~16
A + B USE 8~16
INPUT
UNBALANCED BALANCED
L
1
2
R
2 1 R
UNBALANCED INPUT SELECTOR BALANCED
7 6
4
5
6 UNBALANCED 1 input jack
Use to connect the PRE OUT jacks on a preamplifier to
this unit (page 5). Select UNBALANCED 1 with the
INPUT SELECTOR knob (5).
7 UNBALANCED 2 input jack
Use to connect the PRE OUT jacks on a preamplifier to
this unit (page 5). Select UNBALANCED 2 with the
INPUT SELECTOR knob (5).
2
L +
L +
CONNECTION
ASSIGNMENT
2 1
3
1 : GROUND
2 : HOT(+)
3 : COLD(–)
L
3