Rear Panel Parts Description - Sony TA-P9000ES Operating Instructions Manual

Rear Panel Parts Description

1
INPUT 1
FRONT REAR CENTER FRONT
L L
R R
WOOFER
1 INPUT 1 and 2 jacks
Connect to the 5.1ch OUTPUT jacks on your DVD
player or secondary multi channel decoder (etc.) (see
page 7).
2 BYPASS 5.1ch jacks
Connect to the pre out jacks on a multi channel control
amplifier (see page 5).
Signals input to the BYPASS 5.1ch jacks are output
though the PRE OUT jacks (4) when the power is
turned off.
3 BYPASS 2ch jacks
Connect to the pre out jacks on a stereo control
amplifier (see page 7).
12 GB
2
INPUT 2 BYPASS 5.1ch BYPASS 2ch
REAR CENTER FRONT REAR CENTER
L L
R R
WOOFER WOOFER
To prevent damage to your speakers, do not connect
components whose volume cannot be controlled to the
BYPASS 5.1ch or BYPASS 2ch jacks.
Audio signals input to the BYPASS 5.1ch or BYPASS 2ch
jacks are not routed through this unit's MASTER
VOLUME control. They are output at the same level
they were input.
3 4
PRE OUT
FRONT REAR CENTER
L
R
WOOFER
4 PRE OUT jacks
Connect to your power amplifier(s) (see page 6).
5 CTRL A1 jack
Use to turn the TA-N9000ES power amplifier on/off
automatically whenever you turn this unit on/off
using the supplied remote (see page 8).
6 AC power cord
Connect to a wall outlet.
5 6
CTRL A1
TO POWER AMP