Compressor Blocks - Ik120 Ii; Description; Component Location; Figure 3-1 Ik120 Ii Compressor Block - Bauer Compressors Mini Verticus ImVT 120 II Instruction Manual And Replacement Parts List

CHAPTER 3: MAINTENANCE AND PARTS

3.1 Compressor Blocks - IK120 II

3.1.1 Description

The IK120 II compressors are used to compress air up to 5000 psi. The compressor is a three cylinder,
three stage air cooled, oil lubricated reciprocating compressor. The 3rd stage cylinder is lubricated by
means of the forced feed lubrication system, while the other cylinders are splash lubricated. The cylin-
ders are arranged in a "W" configuration, the 1st stage is in the center, 2nd stage on the right and 3rd
stage on the left looking from the filter side. The compressor block are particularly suitable for continu-
ous operation because of it's rugged design and corrosion resistant intermediate filter and cooler assem-
blies.

3.1.2 Component Location

Figure 3-1 IK120 II Compressor Block
1
2
3
4
5
6
7
8
9
1. 1st Stage Cylinder
2. Intake Filter
3. Oil Filler Neck
4. 3rd Stage Cylinder
5. 2nd Stage Safety Valve
Page 12
6. Oil Filter Housing
7. 2nd Stage Intermediate Separator
8. 2nd Stage Intercooler
9. Condensate Drain Connection
10. 1st Stage Safety Valve
ImVT 120 II Mini Verticus
11. Aftercooler
12. 2nd Stage Cylinder
13. 1st Stage Intercooler
14. Oil Drain Tap
15. Air Outlet Connection
1st Edition, Rev. 0 Chg. 10
10
11
12
13
14
15