Junior Ii Wt; Compressor Block Technical Specifications; Compressor Drive Technical Specifications - Bauer Compressors Junior II WT Instruction Manual And Replacement Parts List

BAUER
COMPRESSORS

1.5.1 Junior II WT

Medium
Intake Pressure
1
Delivery
Maximum Operating Pressure
Final Safety Valve Pressure Setting
Sound Pressure
Sound (immersion) Power
Weight

1.5.2 Compressor Block Technical Specifications

Number of stages
Number of cylinders
1st Stage Cylinder Bore
2nd Stage Cylinder Bore
3rd Stage Cylinder Bore
Intermediate Pressure 1st stage
Intermediate Pressure 2nd stage
Compressor Block Oil Capacity
Maximum Ambient Temperature
Maximum Inclination of Compressor

1.5.3 Compressor Drive Technical Specifications

Drive Motor P/N
Operating Voltage
Horsepower
Speed
Type
1. Free air delivered at bottle filling from 0 to 5,000 psi (0-350 bar) ± 5%
2. This value is valid only if the compressor block oil in normal level position corresponds with the upper mark of the oil dipstick and may not be exceeded.
Page 6
Approximately 100 lbs (44-47 kg)
2
115 VAC, Single Phase, 60 Hz
Junior II WT
Air
Atmospheric
1.0 SCFM (100l/min.)
5,000 psi (350 bar)
As selected
80dB(A)
100dB(A)
60mm
28mm
12mm
94 psi (6.5 bar)
943 psi (65 bar)
12 fluid ounces (360 cc)
41° - 113°F (5°-45° C)
MTR-0219
1½HP
3600 RPM
ODP
1st ed. Rev 0 Chg 3
3
3
5°