Preparation For Long-Term Storage - MULTIQUIP AR14H Operation Manual

ROLLER STORAGE
For storage of the roller for over 30 days, the following is
recommended:
1. Drain the fuel tank completely, or add STA-BIL to the
fuel.
2. Run the engine until the fuel in the injection system is
completely consumed.
3. Completely drain used oil from the engine crankcase
and fill with fresh clean oil, then follow the procedures
described in the engine manual for engine storage.
4. Drain water tank.
5. Clean the entire roller and engine compartment.
6. Remove battery and store it in cool dry place.
7. Cover the roller and place it a clean dry area, that is
protected from harsh elements.
8. Remove ignition key, and store in a safe place.
PAGE 38 — AR14H RIDE-ON ROLLER • OPERATION MANUAL — REV. #3 (09/06/19)

PREPARATION FOR LONG-TERM STORAGE