Huawei CX916 Product White Paper page 23

Huawei CX916 Switch Module
White Paper
Na
me
16G
FC
port
Table 1-4
Table 1-4 Internal ports of the Ethernet switching plane
Nam
e
10GE
port
40GE
port
GE
port
Issue 01 (2017-10-12)
Type Quantit
y
SFP+ 8
describes the internal ports on the Ethernet switching plane of the CX916.
Ty Quan Subca
pe tity rd
Numb
er
- 32 1 to 16
- 1 18
- 2 19
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Subcard Port Serial
Number Number
-
–
Port Serial Description
Number
1 and 2 The ports are
connected to front
half-width slots 1
to 16. The port
serial numbers are
1 and 2.
1 The port is used to
interconnect
Ethernet switching
planes of slots 1E
and 4E, or slots 2X
and 3X.
1 and 2 The two GE ports
are connected to
the two MM910s
respectively for
communicating
with internal ports
eth0 and eth2 on
the MM910s.
1 Overview
Description
The FC switching plane
provides eight 16G FC
ports for connecting to
the storage network.
Ports 1 to 4 are activated
by default, and ports 5 to
8 can be activated with
licenses.
Each port has two
indicators: the orange
one indicates the
diagnosis status, and the
green one indicates the
connection status.
Example
For the CX916 in
slot 2X, the ports
connected to the
compute node in
slot 1 are 10GE
2/1/1 and 10GE
2/1/2.
For the CX916 in
slot 2X, the port is
numbered 40GE
2/18/1.
For the CX916 in
slot 2X, the ports
are numbered GE
2/19/1 and GE
2/19/2.
18