Dynamic Motion Control (Dmc) Playback - Sony DSR-2000P Operating Instructions Manual

Dynamic Motion Control (DMC) Playback

Overview
On-air start point
Waiting for the on-air cue
before starting DMC playback. Stop
Press the REVIEW button
again at the on-air cue.
Starting DMC playback
immediately after preroll
DMC playback allows you to vary the playback speed for a certain section
of a tape, in variable mode (from 1 to +1 times normal speed), and store
the varying speed in memory for later playback at the same varying speed.
For example, during a live broadcast of a sporting event you can set the
start and end points of highlights while recording, and then provide
immediate DMC playba -of those highlights.
During DMC playback the tape moves as shown in the following figure.
Preroll point Speed variation start point
Press the REVIEW button.
Normal speed
DMC playback
playback
Press the PREVIEW button.
Normal speed
DMC playback
playback
Speed variation end point On-air end point
Normal speed playback
Normal speed playback
Chapter 3 Recording and Playback
Stop
55