Sony DSR-2000P Operating Instructions Manual page 122

Extended Menu
Item number Item name
812 AUDIO OUTPUT
LEVEL
PEAK HOLD TIME Set the peak hold time for the audio level meter in the range of OFF (no peak hold) to
813
OVER RANGE
814
DISPLAY HOLD
818
AUDIO REC
MODE
819
AUDIO INPUT
SOURCE
ARRANGE
820 AUDIO OUTPUT
CH3/CH4 SELECT
821
AUDIO
ATTENUATE
WHEN DV TAPE
PLAYBACK
Item number Item name
902 SYSTEM EE
MODE
122
Chapter 6 Setup Menu
Menu items in the 800s, relating to audio controll (continued)
Settings
Select the analog audio output reference level.
+4dB : Set the analog output level of the signal at the reference level to +40 dBm.
0dB: Set the analog output level of the signal at the reference level to 0 dBm.
–6dB: Set the analog output level of the signal at the reference level to –6 dBm.
1.5 seconds in 0.1 second steps.
Select whether to hold the audio level meter OVER display.
OFF : Do not hold.
ON: Hold.
Select the audio recording mode.
2CH : 2ch, 48 kHz mode
4CH: 4ch, 32 kHz mode
Select the audio input signals to be mixed when the MIXING button is lit.
For details, see the section "Making settings for mixing an audio input signal (extension
menu item 819)" (page 123).
Select the signals to be output from the AUDIO OUT CH-3 and AUDIO OUT CH-4
connectors.
LINE : Output the audio channel-3 and audio channel-4 signals from the AUDIO OUT
CH-3 and AUDIO OUT CH-4 connectors as they are.
MONI: Output the monitor audio L-channel (CH-1) and monitor audio R-channel (CH-2)
signals from the AUDIO OUT CH-3 and AUDIO OUT CH-4 connectors, respectively.
When playing back a tape recorded in consumer DV format, select whether to attenuate
the audio output level.
OFF: Attenuate.
ON : Do not attenuate.
Menu items in the 900s, relating to digital process
Settings
Select the bypass E-E mode or system E-E mode.
OFF : Bypass E-E (ordinary setting)
ON: System E-E