Sony DSR-2000P Operating Instructions Manual page 150

ClipLink Guide
How to record ClipLink log data
The following describes how to record the various
ClipLink log data items.
OK/NG status
To designate a scene as "NG", press the NG button on
the camera while shooting the scene or at any time
before you begin shooting the next scene.
All scenes that do not receive an "NG" designation are
recorded as "OK" scenes.
(When you exit the VTR recording mode, changing the
OK/NG status is no longer possible.)
Mark IN/OUT points time codes
This data is especially useful when shooting a video
program for which a scenario has been created.
Set the camera to MARK mode before you start
shooting. While shooting, each time you press the
camera's TAKE button, Mark IN and Mark OUT time
codes are recorded alternately.
Index Picture 1 Index Picture 2
Start
recording
Scene 1
Take 1
Mark OUT
(manual
recording)
Mark IN
(manual
recording)
150
Appendixes
End
recording
Scene 2
Take 1
Mark OUT
Mark IN
(manual
(manual
recording)
recording)
Cue point time codes
This type of data is especially useful when shooting
scenes that may contain unexpected events, such as
when shooting for sports coverage or documentaries.
Set the camera to CUE mode before you start to
record. While recording, each time you press the
camera's TAKE button, the current time code is
recorded as a cue point time code.
Start
Index Picture 1
recording
Scene 1
Take 1
Cue point
time code
(manual
Cue point
recording)
time code
Rec IN
(manual
(automatic
recording)
recording)
End
recording
Rec OUT
(automatic
Cue point
recording)
time code
(manual
recording)