Analog Recording - Sony DHC-MD5 Operating Instructions Manual

Marking track numbers
(continued)
Marking track numbers
automatically while

analog recording

Track numbers are automatically marked
when the input signal continues to be under a
certain level for more than two seconds and
then returns to the previous level.
5
·
·
1
Press r REC .
The MD deck is ready for recording.
2
Press EDIT/NO, then turn MULTI
JOG until "LEVELSYNC ?" appears.
3
Press ENTER/YES.
"LEVELSYNC ON?" appears.
4
Press ENTER/YES again.
"LEVEL-SYNC lights up.
5
Press ∏.
Recording starts.
26
DHCMD5 3-858-047-12.EN (1)
2 3,4 1
‚
º
∏ π §
®
∏ π §
To cancel the track marking
1 Press EDIT/NO, then turn MULTI JOG
until "LEVELSYNC?" appears.
2 Press ENTER/YES.
"LEVELSYNC OFF?" appears.
3 Press ENTER/YES again.
"LEVEL-SYNC" disappears.
In this way, a track number is marked only at
the beginning.