Looping Part Of A Cd - Sony DHC-MD5 Operating Instructions Manual

Looping part of a CD

— Loop
With the loop function, you can repeat part of
a CD during playback. This lets you create
original recordings.
1
·
·
2,4
1
Press FUNCTION repeatedly until
"CD" appears and place a CD on
the disc tray.
2
Press LOOP repeatedly during
pause or stop mode to select
"NORMAL 1 – 5" or
"RHYTHM 1 – 5".
Each time you press the button, the
display changes as follows:
NORMAL 1*
RHYTHM 5
* See "The difference between NORMAL and
RHYTHM" for detail.
3
Press one of the DISC 1 – 3 buttons.
4
Press and hold LOOP at the point
you want to start the Loop function,
and release the button to resume
normal play.
18
DHCMD5 3-858-047-12 (1)EN
º ‚
π §
∏
®
∏ π §
1 3
NORMAL 5
RHYTHM 1*
The difference between NORMAL
and RHYTHM
The original track can be looped in two ways,
Normal and Rhythm.
Original
Hey, Come on everybody! ...
NORMAL
Normal play resumes from the point the loop
started.
Loop length
N n
Hey, C... C... C... C'mon everybody! ...
Press LOOP Release LOOP
RHYTHM
Normal play resumes from the point the loop
ends.
Hey, C... C... C... erybody! ...
nme on ev
Press LOOP Release LOOP
: Unheard portion overlapped by the
loop.
You can choose the Loop length from the five
levels with the range from 0.25 to one second.