HP ProDesk 480 G3 Disassembly Instructions Manual page 9

Figure37 Remove PCB screw
Figure 39 Cut output cable, AC inlet wire, LED wire
Figure41 Heat the solder of Electrolytic Capacitors
greater than 2.5cm in diameter or height and remove it.
(C801,C151,C303,C951) (Gamay-S 300W APFC-Delta)
C801
EL-MF877-00
Template Revision B
C151
C303
C951
PSG instructions for this template are available at
Figure38 Remove AC inlet screw
Figure40 Remove capacitors use solder iron
Figure42 Heat the solder of Electrolytic Capacitors greater
than 2.5cm in diameter or height and remove it.
(C801 ,C951) (Crasto-S 180W E-Star6-Delta)
EL-MF877-01
Page 9