Danfoss EH Series Service Manual page 15

Service Manual
Reassembly
EH Electro Proportional Hydraulic Valve In-line Version
Mount the EH housing in a vice and screw the
spool retainer plug (4) into the housing and
tighten with 27 mm Torque wrench. Remember to
lubricate the O-ring with a small amount of grease.
Insert PV poppet/spring unit (13) into the housing.
Then screw in PV pressure adjustment setting
screw (14) with 5 mm hexagon socket spanner.
Make sure O-ring is lubricated.
L1026660 • Rev BA • Mar 2014 15