Sony MDR-XB950B1 Service Manual page 4

MDR-XB950B1
2-3. FRONT PLATE (L) ASSY (DR1) (L-ch)
– L-ch –
2 Remove the front plate (L) assy
in the direction of the arrow.
to front plate (L) assy (DR1)
[green]
Note 2: When installing the front plate (L) assy (DR1),
4
3 Remove the
solder.
[green]
3 Remove the
solder.
[natural]
Driver wire
MAIN board
[natural]
arrange the driver wire into this portion.
5 front plate (L) assy (DR1)
driver
1 four tapping screws (B2)
Note 1: Be careful not to let the
4 serial No. label
removed screws stick to
the magnet of the driver.