Tray 2 Vertical Transport Motor 2; Re-Installation - Ricoh LCIT RT5100 Field Service Manual

1. Replacement and Adjustment
• When installing the motor, refer to re-installation for the bypass transport motor 2 (page 55
"Bypass Transport Motor 2").

Tray 2 Vertical Transport Motor 2

1. Remove the rear right and left covers (page 8 "Rear Right Cover", page 8 "Rear Left Cover").
2. Tray 2 vertical transport motor 2 bracket [A] (
3. Tray 2 vertical transport motor 2 [A] (
• Do not remove the damper [B] between the motor and the bracket. This damper is factory
installed and cannot be adjusted outside the factory.

Re-installation

1. When attaching the bracket to the motor, install it so that the connector openings [A] face the two
screw holes [B].
68
x3, x1)
x2)