Installing the Smart Dimmer Switch
1.
Make sure you understand the 4 wires on your smart
dimmer switch and the wires inside the junction box. Check
the labels on the switch next to each wire.
2.
Connect the white wire to the neutral wire, which is usually
white as well, by screwing a wire nut tightly around the 2
wires.
Note: There will often be 2 neutral wires already connected
by a wire nut. Connect all the neutral wires together with 1
wire nut.
3.
For extra safety, wrap electrical tape around the wires to
make sure the copper conductor is fully concealed.
Ground
Neutral
Line
Load
18