English - Krups AQUACONTROL FLF1 Series Manual

Hide thumbs Also See for AQUACONTROL FLF1 Series:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 7

English

Thank you for choosing an appliance from the
KRUPS range which is intended exclusively for
the heating of water.
Safety recommendations
• Use your kettle only for the heating of
drinking water.
• Place the kettle and its cord on a flat heat-
resistant surface.
• Keep the kettle and the power cord away
from any source of heat, from any wet or
slippery surface, and from sharp edges.
• Do not fill to above the max level or below
the min level. If the kettle is over-filled,
boiling water may be ejected.
• Do not open the lid when the water is
boiling.
• Check that the electrical installation
conforms with currently applicable stan-
dards, and compatible with the power and
the voltage indicated underneath your
model.
• Connect the kettle only to a socket with an
earth incorporated.
Any connection error will nullify the
guarantee.
• Your kettle must be used only with the lid
closed, and with its associated base.
• The use of multiple sockets and/or mains
extension leads is not recommended.
• Do not place the appliance, the base, the
power cable or the plug in water or any
other liquid.
• Do not use abrasive pads for cleaning.
• To remove the anti-scale filter, take the kettle
off its base, and leave it to cool. Never
remove the filter when the appliance is full
of hot water.
• Our guarantee excludes kettles which
fail or which work badly, due to scale.
• Never use any descaling method other than
that recommended.
• Do not use the kettle if the power cord or
the plug is damaged. In order to avoid all
danger, you should have the faulty part
replaced by a KRUPS approved service
centre.
Sans titre-4
• Do not use the appliance if it is not working
correctly or if it has been damaged. Under
no circumstances should you dismantle the
kettle yourself - this is for your own safety
and will negate any guarantee.
• Any operation other than normal cleaning
and servicing by the customer should be
carried out by a KRUPS approved service
centre.
• This product has been designed for domestic
use only. Any commercial use, inappropriate
use or failure to comply with the instruc-
tions, the manufacturer accepts no
responsibility and the guarantee will not
apply.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capacities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
• Never move the kettle when it is working.
Use
• Place your kettle and its base on a flat,
stable, heat resistance surface. (1)
• Before first use, rinse the inside of your
kettle next fill it with cold water, boil and
empty the kettle, repeat this a couple of
times.
• Remove the lid by aligning the "∇" mark
with the "open" position and lifting it off
(2). To close the kettle, engage the lid, with
the spout cover set back, by placing the "∇"
mark to "open" and turn it anti-clockwise to
the "lock" position. The protective cover will
block off the pouring spout. (3)
• With the kettle unplugged or removed from
its base, fill it through the pouring spout
while pressing the thumb-release latch or via
the open lid, to between the min and max
marks. (4)
• Close the lid (3), and place the kettle on its
base. (5)
• Switch on by pressing the "I" switch. (6)
7
7/12/06, 13:38
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents