Monoprice 9744 Installation Instructions Manual

Monoprice 9744 Installation Instructions Manual

Smooth motion adjustable tilting/swiveling wall mount bracket for lcd led plasma

Advertisement

Quick Links

Maintenance

• Check that the bracket is secure and safe to use at regular intervals(at least every three months).
• Please contact your distributor if you have any questions.
2.5~20kg
(5.5~44lbs)
PID 9744
11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 9744 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Monoprice 9744

  • Page 1 Maintenance • Check that the bracket is secure and safe to use at regular intervals(at least every three months). • Please contact your distributor if you have any questions. 2.5~20kg (5.5~44lbs) PID 9744...
  • Page 2 Component Checklist NOTE: Read the entire instruction manual before you start installation and assembly. IMPORTANT: Ensure that you have received all parts according to the component checklist prior to installation. If any parts are missing or faulty, telephone your local distributor for a replacement. WARNING •...
  • Page 3 2a. For Wood Stud Wall Mounting 1. Removing the Decorative Covers 55mm 55mm (2.2") (2.2") ø 4.5mm (ø 3/16") Find and mark the exact location of mounting holes Drill pilot holes √ Screw the wall mount onto the wall WARNING •...
  • Page 4 2b. For Solid Brick and Concrete Mounting 3. Installing the Decorative Covers 60mm 60mm (2.4") (2.4") ø 10mm (ø 3/8") Mark the exact Mark the exact Mark the exact location of location of location of mounting holes mounting holes mounting holes Drill pilot holes √...
  • Page 5 5. Hooking the TV onto the Wall Mount M-A/M-B M-C/M-D Hooking the TV onto the wall mount Loosen the upper knobs leaving a 4mm space to the VESA plate. Screw the VESA plate onto the TV. · Level the TV. Tighten all screws but do not over tighten.
  • Page 6 6. Tension Adjust 8. Adjustment Tighten the screws using an Allen key (or tighten the knob) untill the display angle is held. 180° +15° +3° -3° -15° Please tighten the socket set screw if the joints make popping sounds during use. 180°...

Table of Contents