NEC UNIVERGE SL2100 Manual page 9

UNIVERGE SL2100 Release 1.8 Overview
Domain Name – This is pre-configured as nld01.nec-pushproxy.com
Access Key – This is pre-configured as:
A2Hi123s>Y=RBx4u5DIt7wO9?70M<2@JMsCD8QErFX:N96GyDBLsK6NsJZ;P2V63
Server Certificate – The correct certificate is pre-installed in the SL2100 main software. For the
SL2100 to use the certificate this is normally configured as AmazonRootCA1.pem
HTTPs Proxy Server Address – If the SL2100 and ST500 VoIP Application smart devices are operating
behind a Web Proxy server enter the IP address of the Web Proxy here.
HTTPs Proxy Server Port – If a Web Proxy server is configured above, configure also the Web Proxy
access port here.
DNS Primary Address – If a Web Proxy is not being used, enter a valid DNS server address in this field
to resolve the FQDN of the Domain Name above.
DNS Secondary Address - If a Web Proxy is not being used, enter a valid DNS server address in this
field to resolve the FQDN of the Domain Name above should the Primary DNS server lookup fail.
3.1.4.2 System Data Programming
This feature is enabled on the following screens:
 Copyright 2018 NEC Enterprise Solutions
Exclusively for use by NEC Enterprise Solutions channel partners
9 of 34
All rights are reserved. Reproduction whole or in part is prohibited without the written consent of the copyright owner.