Advertisement
Installation Instructions &
ELECTRIC HEATER WITH REMOTE CONTROL
Model: EF57US,EF58US,EF59US,EF60US
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR
MAINTAIN THE PRODUCT DESCRIBED.
PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION.
FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY
AND/OR PROPERTY DAMAGE.
WARNING! To reduce the risk of fire, electric shock, or personal
injury, read all the instructions before using this heater.
Homeowner's
Operating Manual
Advertisement
Table of Contents
Related Manuals for Dynasty Fireplaces EF58US
Summary of Contents for Dynasty Fireplaces EF58US
- Page 1 Homeowner’s Installation Instructions & Operating Manual ELECTRIC HEATER WITH REMOTE CONTROL Model: EF57US,EF58US,EF59US,EF60US READ AND SAVE THESE INSTRUCTIONS READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION.
-
Page 2: Important Instructions
IMPORTANT INSTRUCTIONS When using electrical appliances，basic precautions should always be followed to reduce the risk of fire，electrical shock，and injury to persons including the following： 1. Read all instructions before using this appliance. 2. Do not use outdoors. 3. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. -
Page 3: Tool Required
MODEL SIZE 33” EF57US 860×755 EF57US + TE1-33 EF57US + TE2-33 EF57US + TE5-33 36” EF58US 935×795 EF58US + TE1-36 EF58US + TE2-36 EF58US + TE5-36 40” EF59US 1035×885 EF59US + TE1-40 EF59US + TE2-40 EF59US + TE5-40 42” EF60US 1080×935... - Page 4 FIREPLACE ENGINE SIZE units: ㎜ OVER SIZE FLAME view OTHER SIZE model EF57US EF58US EF59US 1025 EF60US 1060 1010 1013 MANTEL FRAMING SIZE units: ㎜ TE3-36/TE4-36 TE3-40/TE4-40 TE3-42/TE4-42 1016 TE1-33/TE2-33/TE5-33 TE1-36/TE2-36/TE5-36 TE1-40/TE2-40/TE5-40 1016 TE1-42/TE2-42/TE5-42 1059...
- Page 5 LOCATING YOUR ELECTRIC FIREPLACE Your new electric fireplace may be installed virtually anywhere in your home. However, when choosing a location ensure that the general instructions are followed. For best results, install out of direct sunlight. Power supply service must be either completed or placed within the electric fireplace prior to finishing to avoid reconstruction.
-
Page 6: Electrical Connection
Pole Magnet 1.5 Install the front onto the insert by locating the pole on both sides well, and slightly push the trim bottom to fit the engine by magnets. Installation is completed. 2. With front TE3/TE4 Pole Screw ST4x8 2.1 Fix the insert into the mantel as step 1.2 & 1.3 & 1.4, locate the front onto the engine by the pole on both sides and push down, then fix the trim by 2pcs of ST4*8 screws. -
Page 7: Maintenance
MAINTENANCE WARNING: ALWAYS UNPLUG THE CORD BEFORE MOVING OR SERVICING. DO NOT IMMERSE HEATER IN WATER! Always turn OFF the heater and disconnect the cord from the electrical outlet before cleaning your heater. Light accumulated dust may be removed from the heater with a soft cloth or vacuum cleaner. ... -
Page 8: Warranty
Flame button The fire has four flame effects, by pressing the flame effect button the unit will cycle through each effect. Heater button Press once turns 750W power on. (Pilot lights illuminated ●○) Press again turns 1500W power on (Pilot lights illuminated ●●) Press third time turns heater off. - Page 9 Dynasty Fireplaces Unit 10 - 3071 No. 5 Road, Richmond, BC V6X 2T4 Canada Tel: (604) 821-1009 / Toll free: 1-877-521-1009 Fax: (604) 821-1019 Http: www.dynastyfireplaces.com Email: info@dynastyfireplaces.com...
Need help?
Do you have a question about the EF58US and is the answer not in the manual?
Questions and answers