If your application includes a multi-speed blower, follow the setup steps in this section.
Step 1
Step 2
Step 3
Step 4
07/29/2019
Multi-Speed Setup
Enter into "MULTI-SPD SETUP" mode:
Press and hold "SELECT" and "NEXT" for 5 seconds
Select "NEXT" to begin "MULTI-SPD SETUP"
(select HOME to return)
MULTI-SPD
Turn on vent hood to its highest setting, then press "NEXT"
SET EXT BL – HI
PRESS NEXT
NOTE: If display reads:
ERROR: 1 = 0.0A
PRESS NEXT
Check CT doughnut wiring to verify it is correct, then press "NEXT"
If vent hood has a medium speed select Y, if not select N
MED SPD
FAN OFF
NEXT
HOME
Y
N
18
EI915