Sony IPELA SNC-P5 User Manual page 72

Note
If you click "Save this program to disk" on the "File
Download" dialog, the
CustomHomepageInstaller.exe file will be saved on
the computer. Double-click the saved file to start it.
4
Read the notes carefully, and click Next.
The Software License Agreement is displayed.
5
Read the agreement carefully, select Agree if you
accept it, then click Next.
6
Type the IP address of the camera to be uploaded in
the IP address box.
7
Specify the HTTP port No. of the camera.
Initial HTTP port No is set to 80.
72
Using the Custom Homepage Installer — Setting an Original Homepage
8
When you use a proxy server, set the following:
For the proxy server of your environments, consult
your network administrator.
When using a HTTP proxy server:
Select Use HTTP proxy server, and type your
settings in the Proxy server address and Proxy
server port No. boxes.
When using a FTP proxy server:
Select Use FTP proxy server, and type your
settings in the Proxy server address and Proxy
server port No. boxes.
Note
If you cannot establish communication with the
camera with the proxy server being used, connect
the camera to the local network and run the installer
without using the proxy server.
9
Type the Administrator name and Administrator
password of the camera to be uploaded.
10
Confirm that all items are correct, then click Next.
11
Type the path for the folder in which your
homepage is stored in the Source folder box, then
click Next.
12
Click OK.
Uploading of the homepage file starts.