Controlling The Monitor Image; Monitoring The Camera Image - Sony Ipela SNC-CS20 User Manual

correctly. To check if Java is installed correctly, refer to
"Java applet viewer" of "About viewers" on page 18.
Controlling the Monitor
Image
You can monitor the camera image on the monitor
window of the main viewer.

Monitoring the camera image

1
Log in to the homepage to display the main viewer.
To log in, see "Logging in as a user" on page 17.
2
Select the frame rate (only when the camera image
is in JPEG).
Click the Frame rate list box to select the frame
rate for transmitting the image. Selectable frame
rates are as follows.
1, 2, 3, 4, 5, 6, 8, 10, 15, 20, 25, 30 fps
"fps" is a unit indicatings the number of frames
transmitted per second.
For example, if you select 30 fps, the image is sent
at the maximum speed of the connected line (30 fps
maximum).
Note
The selected value indicates the maximum number
of frame rate that can be transmitted.
The number of frames actually transmitted may
vary depending on network environments and

Controlling the Monitor Image

21