Monitor Image; Controlling The Monitor Image; Monitoring The Camera Image - Sony IPELA SNC-DF40N User Manual

Each click switches the transmission mode of the video/
audio data among TCP mode, UDP (Unicast) mode and
UDP (Multicast) mode. (page 24)
The last selected mode is saved in the computer, and will
stay selected for the next starting.
Volume
(Displayed when Microphone (page 31) is set to On.)
Drag the bar to adjust the volume.
When you click , the icon changes to
audio output stops. To output the audio, click
Note
If the volume icon is not displayed due to the use of Java
applet viewer, Audio codec may not be set
G.711(64kbps) (page 31) or Java may not be installed
correctly.
To check if Java is installed correctly, refer to "Java
applet viewer" of "About Viewers" on page 18.

Monitor Image

The image shot by the camera is shown here. Date and
time is displayed at the top of the window.
20

Controlling the Monitor Image

Controlling the Monitor
Image
You can monitor the camera image on the monitor
window of the main viewer.

Monitoring the camera image

1
Log in to the home page to display the main viewer.
You can see how to log in on page 17, "Logging in
as a User".
and the
again.
2
Select the frame rate (only when the camera Video
mode is set to JPEG).
Click the Frame rate list box to select the frame
rate for transmitting the image. The selectable
frame rates are the following:
SNC-DF40N:
1, 2, 3, 4, 5, 6, 8, 10, 15, 20, 25, 30 fps
SNC-DF40P:
1, 2, 3, 4, 5, 6, 8, 10, 15, 20, 25 fps
"fps" is a unit indicating the number of frames
transmitted per second.
Note
The frame rate options indicate the maximum
number of frames that can be transmitted.
The number of frames actually transmitted may
vary depending on network environments and
camera settings (image size and image quality
settings).