Preparation; Assigning The Ip Address To The Camera; Assigning An Ip Address Using The Ip Setup Program - Sony Ipela SNC-CS20 User Manual

Preparation

The Preparation section explains what the administrator
has to prepare for monitoring images after installation
and connection of the camera.
Assigning the IP
Address to the Camera
To connect the camera to a network, you need to assign
a new IP address to the camera when you install it for the
first time.
You can assign an IP address in two ways:
• Using the IP Setup Program stored in the supplied CD-
ROM (see this page)
• Using the ARP (Address Resolution Protocol)
commands (see page 91)
This section explains how to assign an IP address to the
camera using the supplied setup program and how to
configure the network.
Before starting, connect the camera, referring to
"Connecting the Camera to a Local Network" in the
supplied Installation Manual.
Consult the administrator of the network about the
assigned IP address.
Notes
• The IP Setup Program may not operate correctly if you
use a personal firewall or antivirus software in your
computer. In that case, disable the software or assign
an IP address to the camera using another method. For
example, see "Assigning the IP Address to the Camera
Using ARP Commands" on page 91.
• If you are using Windows XP Service Pack 2 or
Windows Vista, disable the Windows Firewall
function. Otherwise the IP Setup Program will not
operate correctly. For the setting, see "Configuring
Windows Firewall" in "When using Windows XP
Service Pack 2" on page 9 or "Configuring Windows
Firewall" in "When using Windows Vista" on
page 11.
6

Assigning the IP Address to the Camera

Assigning an IP address using the
IP Setup Program
1
Insert the CD-ROM in your CD-ROM drive.
A cover page appears automatically in your Web
browser.
If it does not appear automatically in the Web
browser, double-click on the index.htm file on the
CD-ROM.
When you are using Windows Vista, pop-up
"AutoPlay" may appear. For details, "Installing
software" in "When using Windows Vista" on
page 10.
2
Click the Setup icon of IP Setup Program.
The "File Download" dialog opens.
When you are using Windows XP Service Pack 2 or
Windows Vista, a message regarding the active
contents may appear. For details, see "Installing
software" in "When using Windows XP Service
Pack 2" on page 8 or "Installing software" in
"When using Windows Vista" on page 10.
3
Click Open.
Note
If you click "Save this program to disk" on the "File
Download" dialog, you will not be able to perform
set up correctly. Delete the downloaded file, and
click the Setup icon again.
4
Install the IP Setup Program on your computer
using the wizard.
If the Software License Agreement is displayed,
read it carefully and click Accept to continue with
the installation.
5
Start the IP Setup Program.
When you are using Windows Vista, message "User
Account Control – An unidentified program wants
access to your computer" may appear. In this case,
click Allow.
The program detects the network cameras
connected to the local network and lists them on the
Network tab window.