Table of Contents
Advertisement
Trio accessible. User manual
Troubleshooting
Troubleshooting
FAQs
My Display isn't showing any information
If your Display shows
, the banner bar is
Awaiting data
red, or there is no l symbol in the banner bar, this could
be because your Display is out of range and is not able
to communicate with the smart meter. Try moving your
Display closer to the smart meter.
If problems persist, please contact your supplier.
Display keeps repeating the same speech
every few minutes
The Display speech repeat setting has been set to Always
or Limited. Change it to Once (
>
>
Menu
Settings
Talking
>
).
options
Repeat
My Display is blank or has switched itself off
The Display backlight may have turned itself off to save
power, press one of the buttons to switch it back on. This
setting can be changed under
>
>
.
Menu
Settings
Display
If you unplugged the Display, the battery may have gone
flat. The battery icon ( o ) will be shown when operating on
battery power. The running time is four hours. Reconnect
to the mains adaptor to recharge the battery.
We recommend that the Display is powered continuously
using the power supply provided.
41
Advertisement
Table of Contents
