Troubleshooting - Sony ICF-SC1 Operating Instructions (primary manual) Operating Instructions Manual

Pll synthesized scanning receiver
Hide thumbs Also See for ICF-SC1 Operating Instructions (primary manual):
Table of Contents

Advertisement

Troubleshooting

Should any problem persist after these tests, consult your
nearest Sony dealer.
The power does not turn on.
The batteries are exhausted.
l
The batteries are inserted with incorrect polarity, or the
l
AC power cord or the car battery cord is not connected
properly.
Key protection is active to-- is present in the display).
l
There is no sound.
The batteries are exhausted.
l
The batteries are inserted with incorrect polarity, or the
l
AC power cord or the car battery cord is not connected
properly.
The VOL control is turned down completely.
l
The SQL control is turned up too far clockwise
l
(towards MAX).
The earphone is plugged in.
l
Cannot operate.
Key protection is on.
l
Reception is weak or unsatisfactory.
Weak batteries.
l
The station is not tuned in correctly.
l
The antenna is not attached properly.
l
You are listening under inferior conditions. In a car or a
l
building, try listening near a window.
The detection mode does not match the band.
l
(page 31).
Scanning does not begin.
The SQL control is turned down too far
l
counterclockwise (towards MIN).
The reception is strong.
l
You are in Memory Scanning and have only one station
l
preset in the memory.
Scanning does not stop.
Reception is weak (see "Reception is weak or
l
unsatisfactory", above).
SQL control is turned up too far clockwise (towards
l
MAX).
33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Icf-sc1pc

Table of Contents