Table of Contents
Advertisement
1.6 SMATV Scanning
In case that several generations use Antenna and LNB in
common, search the service the from 950 to 2150MHz.
Select Searching Type "Automatic" or "Manual".
Select Scan Mode "All" or "Only Free".
You can input alternative symbol rate from 1 to 4
N N o o t t e e
: 1. When your searching type is set to Automatic during
SMATV scanning, you have only to enter the alternative
symbol rate(1~4) you want.
2. When your searching type is set to Manual during
SMATV scanning, you must enter both
frequency and symbol rate.
When you select "Automatic", STB will search all available
channels based on symbol rates over whole frequencies.
On the other hand, it will scan channels with exact
information for symbol rate and frequency on "Manual".
1.7 Reset to Factory Defaults
This is to recover the Factory set values in case the user has
encountered some problems after changing any values of channel
data and others which may be in error.
The screen display will be as follows:
At the request window, if you press
reset to factory default settings automatically.
N N o o t t e e
: This cause your previous settings to be deleted!
OPERATING THE RECEIVER
key, the receiver will be
GB-20
D
I
G
I
T
A
L
S
A
T
E
L
Advertisement
Table of Contents
