Back Panel Terminals - Sony DIRECTV RECEIVER SAT-W60 Installation Manual

Back Panel Terminals

Satellite Receiver
7
6 5
8
Connector
TELEPHONE LINE Connects your Satellite Receiver to a telephone jack.
1
VCR CONTROL
2
PRINTER PORT
3
AUDIO (R)/(L)
4
IN/OUT
VIDEO IN/OUT
5
S-VIDEO IN/OUT
6
CH 3-CH 4 Switch The switch determines which TV channel allows you to
7
VHF/UHF
8
AC IN
9
DIGITAL AUDIO
0
OUTPUT
USB Port
qa
SATELLITE IN
qs
24
4 0 1 3
Description
Allows you to connect your IR Blaster for easy control of
your cable box and/or VCR through the Satellite Receiver.
Allows you to connect your Satellite Receiver to a printer.
Connects your Satellite Receiver to the right and left audio
inputs and outputs of your TV.
Connects your Satellite Receiver to your TV's or VCR's
video inputs and outputs.
Allows you to connect your Satellite Receiver to your TV
and VCR for optimal picture quality (if your TV and VCR
support S-Video.
view programs from your Satellite Receiver when
connected through the VHF/UHF connector.
IN: Allows you to connect your normal (antenna) TV or
cable TV service to your Satellite Receiver.
OUT: Allows you to send normal (antenna) TV or cable
signals to your TV or VCR from your Satellite Receiver.
Connects your Satellite Receiver to a 120V AC outlet.
Allows you to connect an optional digital audio system.
Allows you to connect Universal Serial Bus components.
Connect the cable from your satellite dish antenna here.
Connect a second cable if you wish to use both of the
Satellite Receiver's tuners, this allows features such as PIP
and recording one show while viewing another.
qa 2 qs qs 9