Step 4: Connecting The Ac Power; Step 5: Checking The Access Card; Step 6: Activating Your Service - Sony DIRECTV RECEIVER SAT-W60 Installation Manual

Step 4: Connecting the AC Power

Satellite Receiver
After all other connections are
1
complete, connect the AC Power Cord
to the Satellite Receiver. Then connect
the AC Power Cord to a power outlet.

Step 5: Checking the Access Card

Satellite Receiver
Open the access door by applying gentle pressure to the latch and releasing.
1
Make sure the DIRECTV Access Card is firmly inserted into the front left hand
slot of the Satellite Receiver. After the DIRECTV Access Card is inserted
(correctly), DO NOT remove it unless instructed to do so by your service
provider.

Step 6: Activating Your Service

After checking to see that the DIRECTV Access Card and your Satellite Dish Antenna
is installed, you are ready to begin enjoying service.
Call DIRECTV at 1-800-DIRECTV (347-3288) to begin your service.
For DIRECTV and UltimateTV operational instructions, please refer to the User Guide.
12
AC Power Cord
to power outlet
1
1