Warranty; Fcc Compliance Statement - Humanscale TouchPoint T7 User Manual

System
Error
Error
System

15.0 WARRANTY

For warranty and terms and conditions, please visit www.humanscale.com

16.0 FCC COMPLIANCE STATEMENT

TouchPoint T7
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
Changes or modifications made to this device that are not expressly approved by Humanscale Corporation may void the
user's authority to operate the equipment.
Innovation, Science and Economic Development Canada ICES-003 Compliance Notice:
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
© 2019 Humanscale. All rights reserved. Patent pending. Humanscale is a registered trademark of Humanscale Corporation. Reproduction of this
material in whole or part for any purpose other than that authorized by Humanscale is prohibited.
61
"Please Enter User Height"
"Cart Adjustment Was
Interrupted! Clear Perimeter
and Continue"
"Cart Adjustment Was
Interrupted!" Clear Perimeter
and Enter User's Height."
"PowerTrack Enabled"
Preset Screen - User selects height to be
entered for 1 of 6 presets
Collision Detection - User must ensure that
collision hazard is removed and then select
"RESUME"
Collision Detection - User must ensure that
collision hazard is removed, select "OK" and
then re-enter desired height
None
HSIT70513
Return to Table of Contents