Table of Contents
Advertisement
Connecting electrical equipment to the Multi-Socket Outlet effectively leads to creating a Medical Electri-
cal system and can result in a reduced level of safety
An extension cord or additional Multi-Socket Outlet may not be connected to the T7's integrated
Multi-Socket Outlet
Only equipment to be used as part of the T7 system or compatible with power requirements may
be connected to the Multi-Socket Outlet for power
Potential loss of data if battery runs out of power. Plug in AC cable to charge battery if the low-battery
alarm sounds
The Non-powered T7 cart may have greater risk of leakage current with user-installed technology
on-board
Installing technology in the Non-Powered T7 will pose a greater risk of hazard due to liquid spills.
Extra precaution should be taken.
A hazardous risk of tipping exists when the T7 encounters either of the following heightened concern
conditions:
• Navigating a step up or down of 40mm (1.5") or greater; proceed with caution or find assistance in moving the
cart over a change of height of this magnitude.
• Positioned on an inclined surface of 10° or more; avoid when applicable, but if necessary, proceed with
caution or find assistance to maintain cart stability by firmly holding push handle at all times.
32
Return to Table of Contents
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TouchPoint T7 and is the answer not in the manual?