4 | Bosch IDS BVA 2.0
1 Key to Symbols and Safety Instructions
1.1 Key to Symbols
Warnings
Warnings in this document are identifi ed by a warning triangle
printed against a grey background.
Keywords at the start of a warning indicate the type and seriousness
of the ensuing risk if measures to prevent the risk are not taken.
The following keywords are defi ned and can be used in this document:
DANGER indicates a hazardous situation which, if not avoided, will result
in death or serious injury.
WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION indicates a hazardous situation which, if not avoided, could
result in minor to moderate injury.
NOTICE is used to address practices not related to personal injury.
Important information
T his symbol indicates important information where there is no risk to
people or property.
Data subject to change
1.2 Safety
Please read before proceeding
WARNING:
These instructions are intended as an aid to qualified,
licensed service personnel for proper installation,
adjustment and operation of this unit. Read these
instructions thoroughly before attempting installation or
operation. Failure to follow these instruction may lead to
improper installation, adjustment, service or maintenance
possibly resulting in fire, electrical shock, property damage,
personal injury or death.
This document is customer property and is to remain with this unit.
These instructions do not cover all the diff erent variations of systems nor
does it provide for every possible contingency to be met in connection
with installation.
WARNING: FIRE, ELECTRICAL SHOCK, PROPERTY DAMAGE,
PERSONAL INJURY, OR DEATH
All phases of this installation must comply with NATIONAL,
STATE AND LOCAL CODES. If additional information is
required please contact your local distributor.
WARNING: ELECTRICAL SHOCK
Disconnect all power to unit before installing or servicing.
More than one disconnect switch may be required to
deenergize the equipment. Hazardous voltage can cause
severe personal injury or death.
WARNING: ELECTRICAL SHOCK
If removal of the blower assembly is required, all disconnect
switches supplying power to the equipment must be
deenergized and locked (if not in sight of unit) so the
field power wires can be safely removed from the blower
assembly. Failure to do so can cause electrical shock
resulting in personal injury or death.
WARNING: FIRE, ELECTRICAL SHOCK, PROPERTY DAMAGE,
PERSONAL INJURY, OR DEATH
Because of possible damage to equipment or personal
injury, installation, service, and maintenance should
be performed by trained, qualified service personnel.
Consumer service is recommended only for filter cleaning /
replacement. Never operate the unit with the access panels
removed.
Installation Instructions
02.2019 | Bosch Thermotechnology Corp.