Deleting Pairing Information - Denon AH-GC30 Owner's Manual

Contents Preparation

Deleting pairing information

Delete pairing information if you have made a mistake entering pairing
information or when re-pairing a device.
1
Press and hold the volume "+" button for
approximately 5 seconds while in pairing mode.
The Bluetooth LED flashes 5 times and the pairing information is
erased.
5sec.
0 To make a Bluetooth connection after clearing the pairing information, follow the
instructions on "1: Connecting to the headphones for the first time" (v p. 14).
Connections
R
Operation Troubleshooting
Auto dimmer function
The auto dimmer function changes the LED brightness when the
headphones are tilted past the defined angle. When the headphones are
on, the LED dims so that the brightness does not disturb people around
you. The brightness increases if the headphones are laid horizontally
when charging, etc.
33
Appendix