Pairing With Bluetooth Device - Denon AH-C160W User Manual

1. Charging
Charge the headphones using the supplied dedicated charging cable before use.
The charging status can be checked from the status indicator LED on the headphones.
• Charging: Lights red
• Charging completed: Lights green
It will take approx. 2 hours from empty to full charge.
2. Wearing
1. Insert the ear tip of the "L" of the headphones into the left ear, and the ear tip of the "R"
into the right ear.
2. Lift the hook parts of the headphones over the ears and then hook them behind the ears as
shown in the figure.

3. Pairing with Bluetooth device

Register (Pairing) a Bluetooth device to the headphones.
1. Activate Bluetooth function of the Bluetooth device to be connected.
2. With the headphones' power is off, press and hold the control button for approx. 3 seconds.
The status indicator LED lights purple for approximately 1 second and then flashes red and
blue alternately indicating that the headphones are in pairing registration mode.
3. Select the "DENON AH-C160W" appears on the Bluetooth device to be connected.
When a connection is established, the status indicator LED on the headphones lights blue
for approximately 5 seconds.
If you are requested to enter a PIN code (pass key), enter "0000" (four zeros).
Web Manual
Refer to the web manual for other functions information
and operation procedure details, such as remaining battery
indication, audio guidance, and so on.
Enter the following URL into your web browser:
manuals.denon.com/AHC160W/ALL/EN/
1