Connecting To The Headphones For The First Time - Denon AH-GC30 Owner's Manual

Contents Preparation
1: Connecting to the headphones for
the first time
Check that the headphones are not connected to any Bluetooth device
before pairing.
1
Turn on the Bluetooth function of your Bluetooth
device.
For details, see the Owner's Manual of the Bluetooth device that
0
you want to connect.
Connections Operation
2
While the power is off, press and hold the 1/3 button
for approximately 4 seconds.
The Bluetooth LED lights and then blinks in approximately 1-second
intervals as the headphones enter pairing mode.
0 The headphones turn on after pressing and holding the 1/3 button for
0 If the Bluetooth LED does not light even when the 1/3 button is pressed,
14
Troubleshooting
4sec.
approximately 2 second. Continue pressing the button.
the rechargeable battery has no power remaining. Charge the battery.
(v p. 8)
Appendix
R