MEDI RENT BIO-COMPRESSION PANTS Setup Manual

© 2019 Medi-Rent Pty Limited
PH: 1300 726 666
Medi-Rent Pty Limited
ABN: 37 603 454 360
Unit 3, 61 Beauchamp Rd,
Matraville NSW 2036
P: 1300 726 666
F: 02 9316 9998
E: info@medirent.com.au
W: www.medirent.com.au
BIO-COMPRESSION Set-up Guide: pants
This guide is intended as a quick reference once the user manual has been read in-full
1
Place the device somewhere easily
accessible.
Wear lightweight long pants under the Bio
Compression pants.
3 4
SC-2008-OC ON |
40 40 45 45 50 50
35 35
Sequential Circulator 55 55
30 30 60 60
65 65
25 25 70 70
75 75
20 20 80 80
PRESSURE PRESSURE OFF 0
8 8 7 7 6 6 5 5 4 4 3 3 2 2 1 1
Rx ONLY Rx ONLY
8 8 7 7 6 6 5 5 4 4 3 3 2 2 1 1
8 7 6 5 4 3 2 1
Connect cuff hose to the device, ensuring
Find the position where you will be rested
the numbers and indicators match.
during treatment on a bed or couch where
your legs are elevated and supported.
6 7
Sit as far back on the chair or bed as able.
Ensure you are on a non-slip surface. Stand up
with the garment partially zipped up. Lift the
trousers and zip the remainder of the garment
on each side. Adjust the garment to fit your
body without rotating, twisting, or large
creasing of the material.
2
Plug your power lead in, ensuring that it is
not a trip hazard.
(Often you will need to visit the bathroom
during treatment due to fluid evacuation).
5
Unzip the pant garment partially and place
it on the couch or bed. If seated, step each
foot into position ensuring the heels are
located to the back of the garment. Zip the
legs up as far as you can.
8
Use your upper body as a counter weight to
lift your legs up onto the couch/bed.