4. align the rear hardware parts of the frame with
the rails of the fist line array element and lock
with the pins in the "Default" position. To sim-
plify the procedure it could be of help to lift the
frame bar with one hand, keeping it steady with
a foot, and insert the pin with the other hand
(figure 20).
figure 21
figure 22
OUTLINE S.R.L.
Via Leonardo da Vinci, 56
25020 Flero (Brescia) Italy
Tel.: +39 030.3581341
Fax +39 030.3580431
info@outline.it
5. perform the same procedure for the front har-
dware parts of the frame, helping yourself with
one hand to align the parts (figures 21 and 22);
6. fix the shackles to the motor coupling points as
calculated by OpenArray2 (figure 23);
16
figure 20
figure 23
www.outline.it