Open Array 2 - Pre-Rigging - Outline Superfly Rigging Manual

3. OPEN ARRAY 2 - PRE-RIGGING

OpenArray2 is a software which helps the system
engineer to calculate and establish a first relationship
between the sound system and the venue.
Given the potential of this software for acoustic fo-
recasts and the possibilities of creating projects of va-
rious types (which are not covered by this manual), it
Some of the data regarding arrays vary based on
the use of one (figure 4) or two motors (figure 5). Logi-
cally the use of more motors guarantees greater ma-
neuverability (during the rigging phases) and stability
of the array.
OUTLINE S.R.L.
Via Leonardo da Vinci, 56
25020 Flero (Brescia) Italy
figure 4
Tel.: +39 030.3581341
Fax +39 030.3580431
info@outline.it
will be possible to know precisely if the configuration
is feasible in relation to the model and the number of
elements of the arrays used, to the inclination of the
clusters, motor coupling points and all the necessary
data for the PA man for a correct rigging in the field.
The angles selected for each element will be visible
in correspondence with the load bars in the relative
box on the OpenArray2 mechanic paper.
It is advisable to print and always carry the mecha-
nic paper while doing the rigging.
10
figure 5
www.outline.it