Table of Contents
Advertisement
Attention! When the software indicates the array is
out of range (as in figures 6 and 7), it could be neces-
sary to:
•
reassess the overall inclination of the array in
case the center of gravity is out of range;
•
remove some line array elements because the
maximum limit weight has been exceeded;
•
both of the above.
OUTLINE S.R.L.
Via Leonardo da Vinci, 56
25020 Flero (Brescia) Italy
Tel.: +39 030.3581341
Fax +39 030.3580431
info@outline.it
figure 6
These cases can also occur with ground stack con-
figurations (figure 8).
figure 8
11
figure 7
www.outline.it
Advertisement
Table of Contents
