Table of Contents
Advertisement
3. lock the bars with the locking pins using one of
the corresponding holes, according to the cho-
sen degree (figure 14);
4. align the bars with the rails of the next array
element and fasten them with the locking pin in
the "Default" position if you've chosen the de-
gree value between 0° and 7.5°, or in the "0.25°
ONLY" position if the 0.25° value has been cho-
sen (figures 2 and 15);
OUTLINE S.R.L.
Via Leonardo da Vinci, 56
25020 Flero (Brescia) Italy
Tel.: +39 030.3581341
Fax +39 030.3580431
info@outline.it
5. once the angles for each couple of line array
elements are ready and put in order in which
they are to be flown, it is possible to proceed
with the installation of the frame bar.
figure 15
14
figure 14
www.outline.it
Advertisement
Table of Contents
