Toshiba MMU-AP0072H2UL Manual page 19

E15-3C1
11-2 Fresh-air inlet box (TCB-GB1602UUL)
Accessories
(The following parts are included.)
No. Name
Outside air
(1)
introduction port
Outside air
(2) introduction port
fixing metal part
Duct flange
(3)
Ø3.9" (100 mm)
Mounting screws
(4) 0.16" × 0.4"
(4 × 10 mm)
Heat insulating
(5)
material A
Heat insulating
(6)
material B
(7) Wind shield
Installation
(8)
manual
(9) Wire
Dimension
3.0" (77)
5.7" (144)
007 to 030 type
036 to 042 type
*MMU-AP0072H2UL-1 is not used.
Qty Remark
1
1
1
16
2
2
1
1
1
3.7" (95)
4.3" (108)
A
14.1" (358)
16.6" (421)
Installation
(Fig. 1)
Shield plate for box
(Remove)
(Fig. 2)
(1) Outside air introduction port
(2) Outside air introduction
port fixing metal part
(4) Mounting screws
(Fig. 3)
After installing the
panel, fix the wind
shield (7) with the
mounting screws (4).
Drain pipe Refrigerant pipe
connecting port connecting port (Liquid)
Ceiling bottom
surface
NOTE
This inlet box shall be used with the fresh-air chamber.
19
MMU-AP___2H2UL
(6) Heat insulating
material B
(5) Heat insulating
material A
Shield plate assembly
(4) Mounting screws
(3) Duct flange
(7) Wind shield
(4) Mounting screws
Unit: in (mm)
Refrigerant pipe connecting port (Gas)
Fresh-air inlet box
3.7" 3.0"
(95) (77)
Fresh-air chamber
(Sold separately)
37.4" (950)