Beyerdynamic UNITE CC Series Quick Start Manual page 4

4
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other device (including amplifiers)
that produce heat.
9. For safety purposes do not make any changes to the polarized or grounding type plug. A polarized plug has two
contacts with one wider than the other. A grounding type plug has two contacts and a third grounding prong. The
wide contact or the third prong are provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord by not walking or standing on it or pinching, this is considered for plugs especially where
they exit from the device.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the device. When
a cart is used, use caution when moving the cart/device combination to avoid injury from tipping over.
13. Unplug this device during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any
way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the device,
the device has been exposed to rain or moisture, does not operate normally, or has been dropped.
Location
• The equipment must be set up so that the mains switch, mains plug and all connections on the rear of the device are
easily accessible.
• If you transport the equipment to another location take care to ensure that it is adequately secured and can never
be damaged by being dropped or by impacts on the equipment.
Fire hazard
• Never place naked flames (e.g. candles) near the equipment.
Unite CC – Cockpit Case