• HEED all warnings and follow all instructions. Exemption from liability • beyerdynamic GmbH & Co. KG will not be liable if any damage, injury or accident occurs due to negligent, incorrect or inappropriate operation of the product. Humidity / heat sources •...
WA-CD – Charging Unit 3. Functions • Separate charging of each rechargable transmitter. • Transmitters with a NiMH battery as well as 2 x2 NiMH batteries in the beltpack transmitter compartments can be recharged. • The charging status before start of charging is irrelevant. The batteries , however, that are charged in the same charging compartment should have the same capacity and the same charging state, because otherwise the battery that is higher discharged will not be recharged completely which can result in a deep discharge of the battery when the transmitter is in use again.
WA-CD – Charging Unit 6. Power connection • Mount the appropriate power plug to the power adaptor. • Connect the power adaptor to the charger and to the mains. • The charger provides no separate on/off switch and will start up automatically. •...
• If necessary, you can reset the IP address to the default address again by using the IP reset button. • You will find detailed information on the reset of the IP address in the separate manual about the communication with media control system (remote communication). Refer also to: www.beyerdynamic.com 10. Firmware update •...
Page 10
Theresienstr. 8 | 74072 Heilbronn – Germany Tel. +49 (0) 7131 / 617 - 0 | Fax +49 (0) 7131 / 617 - 204 info@beyerdynamic.de | www.beyerdynamic.com Weitere Vertriebspartner weltweit finden Sie unter www.beyerdynamic.com For further distributors worldwide, please go to www.beyerdynamic.com...
Need help?
Do you have a question about the WA-CDb and is the answer not in the manual?
Questions and answers