Conditioning The Battery; Service Mode - Beyerdynamic UNITE CC Series Quick Start Manual

16
6.4 utomatic Firmware Update
• By using the Unite Cockpit Case you can upload firmware updates to Unite transmitters/receivers.
• With the current factory setting the Unite Cockpit Case will automatically update the firmware of the Unite
transmitters/receivers during the first charging process. Just insert the transmitters/receivers into the charging
compartments.
During the firmware update the status indicator light of the Unite transmitters/receivers will illuminate red. This
process will take approx. 5 minutes. Should the process take longer than 10 minutes, turn the Unite Cockpit Case off
and on again. The update process will then restart.
ttention:
Please note that after a successful update to a new firmware version, the Unite transmitters/receivers are no longer
compatible with older firmware versions.
6.5

Conditioning the battery

• In order to achieve the maximum capacity of the battery, we recommend discharging the transmitters/receivers
completely to carry out a complete charging cycle afterwards.
• This also increases the accuracy of the battery indicator on the display of the Unite transmitters/receivers.
6.6

Service mode

• For maximum operational reliability, the Unite Cockpit Case features a so-called service mode.
• If the device is disconnected from the mains within 45 seconds after being switched on (e.g. by accidental
switching off), the device will boot in a safety mode and check itself.
• If this service mode is activated automatically (after booting unsuccessfully), the system will return to its usual
operating mode after approx. 3 minutes.
Unite CC – Cockpit Case