Silvercrest Z30412-IT Operating Instructions And Safety Advices page 201

66149_silv_Energiekosten-Messgerät_Content_ES-IT-PT-GB.indd 203 25.05.11 12:21
{ Ensure that the current required for
the load is greater than 0.005 A.
z The energy cost meter shows
no value for energy cost.
€ The current is below the minimum
display range value of 0.005 A.
{ Ensure that the current required for
the load is greater than 0.005 A.
€ No electricity tariff has been
programmed.
{ Program the electricity tariff (see "Pro-
gramming the electricity tariff", "Pro-
gramming electricity tariff 1 and 2").
€ The switch-on duration of the energy
cost meter is too short.
{ Check the energy cost again at a
later point in time.
GB/MT 203